Static FP question

[sullust]

I just installed a B&M FP guage. It's reading 60psi static with the vacumn line plugged or attached to the FPR. Is this normal? Isn't the the static FP supposed to go down a little with the vacumn line plugged?

What FP should I be looking for? I have the basic jrsc 6psi setup with a BTC and MAP sensor.

Thanks,
Dave

------------------

[SinisterSI]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by sullust:

What FP should I be looking for? I have the basic jrsc 6psi setup with a BTC and MAP sensor.

Thanks,
Dave

<HR></BLOCKQUOTE>

With the vacuum line disconnected from the FMU and plugged by a tee it should be 58-60psi like Randomwalk101 said. But since you have the JR map controller you should lower it even more to like 50psi. I have mine down to 42psi at altitude and i'm still running rich.



------------------

[randomwalk101]

With vaccum off, fp should read around 58-60psi...with vaccum, i see 50psi.

------------------
It's powered by GASOLINE damnit!!!